How to recognise the quality of edgebanding?
Release time:
2023-12-07 15:23
How to recognise the quality of an edge bandIf the surface is very rough, there are pull marks that the quality is certainly not good, this is the surface quality of the sealing strip. With the edge of the inner material is not too good or bad, mainly is the edge of the production process and staff production technology skills. Good edge band is: the surface must be smooth, no blistering or very little blistering, no pulling or very little pulling, moderate gloss, not too bright or too matte (unless there are special requirements).
2, look at the edge of the strip surface and bottom flatness, thick bushes are uniform, otherwise it will lead to the edge of the strip and the combination of the plate, the glue line is too eye-catching or plate and the edge of the strip between the gap is too large to affect the overall beauty. Details determine success or failure, often a small detail problem, may bring the overall effect of the embarrassing situation.
3, whether the edge is white, bending edge strip surface is white serious, edge strip trim colour is close to the surface colour of the plate in the difficult. pvc edge strip is mainly made of pvc and calcium carbonate plus additives, if the content of calcium carbonate is too high, there will be edge white, bending white phenomenon, proving that this kind of product quality is not good.
4, whether the strength is still available, there is no elasticity, strong high means good abrasion resistance, the corresponding quality is also the better, the strength is too high also means that the processing difficulty increases. Elasticity is not high means wear resistance is not high, low aging resistance. According to the actual production needs, generally need to be hand trimmed, can be appropriate to do a soft point, automatic sealing machine can be appropriate to do a hard point.
5, whether the backing glue on the even, in the use of the process is easy to fall off.